On request
imported
SW-Ⅱ Series
SW-Ⅱ Series is a multi-tasking Swiss turning platform for precision small parts, combining hybrid guide bush (bush or bushless), complete front/cross/rear machining, and sub-spindle workflows. SW-20Ⅱ covers Ø20 mm, SW-32Ⅱ up to Ø32 mm, with high spindle speeds and production-focused tooling.
- Hybrid guide bush supports bush or bushless machining
- Complete tooling enables front, cross and rear machining
- Sub-spindle workflow with strong bar and part handling
Brand:
- GOODWAY
Overview
SW-Ⅱ Series Swiss Type Turning Centers (SW-20Ⅱ / SW-32Ⅱ)
SW-Ⅱ Series targets high-precision production of small components where cycle time and repeatability depend on stable support and multi-operation capability in one setup. The series is positioned for complex parts by combining turning with milling/drilling capability via a complete tooling layout.
A core element is the hybrid guide bush concept, allowing operators to run with a guide bush for maximum support or switch to bushless mode when part geometry and material behavior make it more efficient. This flexibility helps balance stability, finish, and throughput across mixed part families.
SW-Ⅱ is offered in at least two primary size classes: SW-20Ⅱ for up to Ø20 mm machining diameter and SW-32Ⅱ for up to Ø32 mm, with per-chuck turning lengths specified for bush and bushless operation. This makes the lineup suitable for miniature shafts, pins, connectors, and precision fittings.
For production practicality, the platform supports strong clamping and a tooling system designed to cover front, cross, and rear operations in one process. An optional deep-hole drilling concept on the sub-spindle is highlighted for applications that require drilling depth without moving parts to a second operation.
Key Features – SW-Ⅱ Series
Hybrid Guide Bush System
Select bush or bushless mode to match part geometry and process needs.
Complete Tooling Coverage
Front, cross and rear machining capability supports done-in-one production.
Precision Small-Part Envelope
SW-20Ⅱ up to Ø20 mm and SW-32Ⅱ up to Ø32 mm machining diameter.
Deep-Hole Drilling Option
U-Drill concept on the sub-spindle for deep-hole drilling applications.
Promo Video – GOODWAY SW-20 II
Specifications SW-Ⅱ
|
Category |
Item |
Unit |
Value |
|---|---|---|---|
|
Capacity |
Max machining diameter |
mm |
Ø20 (SW-20Ⅱ) / Ø32 (SW-32Ⅱ) |
|
Capacity |
Max turning length per chuck (bush) |
mm |
220 (SW-20Ⅱ) / 315 (SW-32Ⅱ) |
|
Capacity |
Max turning length per chuck (bushless) |
mm |
50 (SW-20Ⅱ) / 80 (SW-32Ⅱ) |
|
Spindle |
Main spindle speed |
rpm |
10 000 (SW-20Ⅱ) / 7 000 (SW-32Ⅱ) |
|
Spindle |
Sub-spindle speed |
rpm |
10 000 (SW-20Ⅱ) / 7 000 (SW-32Ⅱ) |
|
Tooling (SW-32Ⅱ) |
O.D. tools / I.D. tools |
count |
6 / 4 |
|
Tooling (SW-32Ⅱ) |
Cross live tools / rear-end tools |
count |
5 to 10 / 4 |
|
Workholding |
Clamping |
— |
Hydraulic cylinder clamping (highlighted feature) |
|
Design |
Guide bush mode |
— |
Hybrid, bush or bushless selectable |
Applications
General machining
Mixed prototype and production work across sizes; flexible envelopes and quick changeovers speed setups, reduce handling, and keep output consistent day to day.
Automotive
Tooling and production parts across the supply chain, from fixtures and dies to turned and milled components; repeatable referencing supports surface quality and tight tolerances.
Aeronautics
Precision structural parts, fixtures, and machined assemblies; probing and process control (where available) help keep flatness and bores in tolerance on long cycles.
Defense
Housings, carriers, and structural parts in high-strength alloys; stable machining conditions and verified datums deliver repeatable accuracy under heavy cuts.