On request
imported
GTS-150 Series
GTS-150 is a compact twin-spindle, twin-turret CNC turning center designed for true simultaneous machining in one setup. It runs a 6″ chuck with Ø42 mm bar capacity and Ø180 mm turning range, up to 6,000 rpm, with optional live tooling and Y-axis capability.
- Twin spindles + twin turrets for parallel cycle reduction
- Compact 6″ / Ø42 mm bar setup for production turning
- Options: live tooling (4,000 rpm) and Y-axis capability
Brand:
- GOODWAY
Overview
GTS-150 – Twin Spindle & Twin Turret Turning Center
The GTS-150 is built for high-output turning by running two spindles and two turrets in parallel. This architecture supports true simultaneous machining and short, repeatable cycles for production environments.
Within a compact footprint, the platform targets smaller parts with a 6″ chuck and Ø42 mm bar capacity. The work range is specified around Ø180 mm max swing diameter and 180 mm max turning length, keeping transfers and synchronization efficient.
For motion performance, the machine uses linear guideways and production-focused rapid traverses, helping reduce non-cut time between operations while maintaining consistent tool approach and positioning.
When parts require more than turning, GTS-150 can be configured with a live-tooling turret (up to 4,000 rpm) and an optional Y-axis package (model-dependent). This enables drilling/milling features in the same setup to reduce handling, WIP, and variability.
Key Features – GTS-150 Series
Twin Spindles, Twin Turrets
Simultaneous machining with two turrets working across both spindles.
Compact Bar-Capable Setup
6″ chuck and Ø42 mm bar capacity for stable production turning workflows.
High-Speed Spindle Performance
Up to 6,000 rpm with 5.5/7.5 kW spindle power for fast cycles.
Live Tooling and Y-Axis Options
Optional 4,000 rpm live tooling and Y-axis capability for done-in-one parts.
Specifications GTS-150
|
Category |
Specification |
Unit |
GTS-150 |
Availability |
|---|---|---|---|---|
|
CAPACITY |
Max. swing diameter |
mm |
Ø180 |
Standard |
|
CAPACITY |
Max. turning length |
mm |
180 |
Standard |
|
WORKHOLDING |
Chuck size |
– |
6″ |
Standard |
|
WORKHOLDING |
Bar capacity |
mm |
Ø42 |
Standard |
|
SPINDLES 1 & 2 |
Spindle motor output, continuous |
kW |
5.5 |
Standard |
|
SPINDLES 1 & 2 |
Spindle motor output, 30 min. |
kW |
7.5 |
Standard |
|
SPINDLES 1 & 2 |
Max. spindle speed |
rpm |
6,000 |
Standard |
|
AXES |
Max. X1/X2-axis travel |
mm |
160 |
Standard |
|
AXES |
Max. Z1-axis travel |
mm |
210 |
Standard |
|
AXES |
Max. Z2-axis travel |
mm |
600 |
Standard |
|
GUIDEWAYS |
Guideway design |
– |
High-precision, low-wear linear guideways |
Standard |
|
TURRETS |
Turret arrangement |
– |
Opposed twin turrets |
Standard |
|
TURRETS |
Stations per turret |
– |
12 |
Standard |
|
LIVE TOOLING TURRETS |
Stations per live-tooling turret |
– |
12 |
Optional |
|
LIVE TOOLING TURRETS |
Max. live tooling speed |
rpm |
4,000 |
Optional |
|
Cf-AXIS |
Torque output, continuous |
N·m |
120 |
Optional |
|
Y-AXES |
Max. Y1/Y2-axis travel |
mm |
60 (±30) |
Optional |
Specifications may vary depending on the selected machine configuration and optional equipment. Please contact MILCO for confirmation of the required configuration.
Applications
General machining
Mixed prototype and production work across sizes; flexible envelopes and quick changeovers speed setups, reduce handling, and keep output consistent day to day.
Capital goods
Industrial equipment components from plates and frames to precision shafts and housings; scalable platforms and stable processes preserve accuracy over long runs.
Automotive
Tooling and production parts across the supply chain, from fixtures and dies to turned and milled components; repeatable referencing supports surface quality and tight tolerances.