On request
imported

GS-2000 Series

GS-2000 is a CNC turning center series with a 30° slant bed and box ways for demanding production machining. GS-2000 and GS-2800 variants provide 8″ and 10″ chucks, Ø65 mm and Ø75 mm bar capacity, and turning lengths of 780 or 1,530 mm in the basic configurations.

  • Up to Ø570 mm turning diameter in the basic configuration
  • 15 kW continuous spindle output and 18.5 kW for 30 minutes
  • Live tooling, C-axis, Y-axis and sub-spindle configurations
Model Code / Name: GS-2000

Brand:

  • GOODWAY

Overview

GS-2000 CNC Turning Centers for Production Machining

The GS-2000 family covered here includes GS-2000, GS-2000L, GS-2800 and GS-2800L. The two chuck sizes and two bed lengths allow selection according to bar diameter, workholding requirements and component length.

The 30° slant bed and wide-span box ways on X and Z provide a rigid foundation for heavy cuts and interrupted turning. A programmable tailstock supports shaft machining, with servo tailstock and steady-rest options available for suitable applications.

Both main-spindle variants deliver 15 kW continuously and 18.5 kW for 30 minutes. GS-2000/2000L reaches 4,500 rpm, while GS-2800/2800L reaches 3,500 rpm. The 12-station servo-indexing turret supports successive turning operations, with 0.8-second indexing between opposite stations.

Live tooling and Cf-axis control extend the process to milling, drilling and tapping. Y-axis versions provide 100 mm of travel (±50 mm) for off-center features, with a maximum turning diameter of Ø400 mm. An optional 6″ sub-spindle reaches 6,000 rpm and enables rear-end machining, reducing the need to transfer the workpiece to another setup.

Key Features – GS-2000 Series

Rigid Box-Way Construction

The 30° slant bed and widely spaced box ways support machining under high cutting loads.

Standard and Long-Bed Versions

Turning lengths of 780 and 1,530 mm in the basic configurations accommodate both shorter components and extended shafts.

15/18.5 kW Main Spindle

Continuous output of 15 kW and 18.5 kW for 30 minutes support demanding turning operations, with spindle speed matched to the selected model.

Integrated Front and Rear Machining

Live tooling, C-axis, Y-axis and sub-spindle configurations allow turned surfaces and additional features to be machined within one machine.

Specifications

Category

Specification

Unit

GS-2000 / GS-2000L

GS-2800 / GS-2800L

CONSTRUCTION

Bed inclination

°

30

30

CONSTRUCTION

X / Z guideway type

–

Box ways

Box ways

CAPACITY

Max. swing diameter

mm

Ø700

Ø700

CAPACITY

Max. turning diameter, basic configuration

mm

Ø570

Ø570

CAPACITY

Max. turning length, standard / L, basic configuration

mm

780 / 1,530

780 / 1,530

CAPACITY

Main chuck size

in

8″

10″

CAPACITY

Bar capacity

mm

Ø65

Ø75

MAIN SPINDLE

Motor output, continuous

kW

15

15

MAIN SPINDLE

Motor output, 30 min.

kW

18.5

18.5

MAIN SPINDLE

Max. spindle speed

rpm

4,500

3,500

X / Z AXES

Max. X-axis travel, basic configuration

mm

300

300

X / Z AXES

Max. Z-axis travel, standard / L

mm

780 / 1,530

780 / 1,530

TURRET

Stations

T

12

12

TURRET

Indexing time, opposite stations

s

0.8

0.8

LIVE TOOLING, OPTIONAL

Live tooling stations

T

12

12

LIVE TOOLING, OPTIONAL

Drive motor output

kW

4.5

4.5

LIVE TOOLING, OPTIONAL

Collet size

–

ER32

ER32

C-AXIS, OPTIONAL

Control system

–

Cf-axis with disk brake

Cf-axis with disk brake

Y-AXIS, OPTIONAL

Max. turning diameter with Y-axis

mm

Ø400

Ø400

Y-AXIS, OPTIONAL

Max. travel

mm

100 (±50)

100 (±50)

PROGRAMMABLE TAILSTOCK

Center taper / type

–

MT#3 dead / MT#4 live

MT#3 dead / MT#4 live

PROGRAMMABLE TAILSTOCK

Quill travel

mm

120

120

SERVO TAILSTOCK, OPTIONAL

Availability

–

Available

Available

SERVO TAILSTOCK, OPTIONAL

Center taper / type

–

MT#3 dead / MT#4 live

MT#3 dead / MT#4 live

SUB-SPINDLE, OPTIONAL

Chuck size

in

6″

6″

SUB-SPINDLE, OPTIONAL

Motor output, continuous

kW

5.5

5.5

SUB-SPINDLE, OPTIONAL

Motor output, 30 min.

kW

7.5

7.5

SUB-SPINDLE, OPTIONAL

Max. spindle speed

rpm

6,000

6,000

Notes

  • The table covers GS-2000/2000L and GS-2800/2800L. Paired length and travel values refer to the standard-bed and L long-bed versions respectively.
  • The Ø570 mm turning diameter and 780/1,530 mm turning lengths describe the basic configurations. Live tooling, Y-axis, sub-spindle equipment and workholding can change the usable machining envelope.
  • Y-axis versions have a maximum turning diameter of Ø400 mm and 100 mm total Y-axis travel (±50 mm).
  • M versions combine live tooling and C-axis; Y versions add Y-axis. S versions have a sub-spindle, while MS and YS combine it with the corresponding machining functions.
  • The 120 mm quill travel applies to the programmable quill tailstock. Servo tailstock construction and motion differ; center type depends on the selected equipment.
  • Main-spindle and sub-spindle continuous outputs are distinguished from their 30-minute outputs. The 4.5 kW live-tooling drive is a separate system.

Applications

General machining

GS-2000 can turn locating mandrels for machining fixtures. The locating diameter and shoulder face can be finished in one setup, giving the workpiece a common reference for centring and axial positioning.

Capital goods

For hydraulic cylinders, GS-2000 can machine rod glands. The guide bore, internal seal grooves and outer diameter that locates the gland in the cylinder can all be turned in one setup.

Automotive

On automotive wheel hubs, GS-2000 can turn the bearing seats and wheel mounting face. Versions with live tooling and C-axis control can also drill the wheel bolt pattern in the same setup.

Energy

The long-bed versions can turn shafts for cooling-water pumps in power plants. Tailstock support limits deflection while the bearing journals, seal seats and impeller mounting diameter are machined.

Oil & Gas

For pipeline gate valves, GS-2000 can turn valve stems, including the section that runs through the packing and the external thread that engages the stem nut. Longer stems can be supported by the tailstock.

Wind energy

GS-2000 can turn planet pins for the gearboxes that adjust wind turbine blade pitch. The bearing seat and locating shoulders can be machined together to position the planet gear on its carrier.

Railway

For railway brake linkages, GS-2000 can turn pivot pins and matching bushings. Operations include turning the pin shank, cutting retaining-ring grooves and boring the bushing to fit the pin.

Downloads